Nav table cabinet

Well today I got the basic cabinet installed, well, put in place or dry fit.  I am pretty happy with the result, but for the problem of the stain on the wood not matching the rest.  I may end up having to start over with these two pieces, but if I do at least I can use these as templates.

I wasn't planning on putting doors on this cabinet, but I may yet.  The doors would affect the clearance of the lifting desk lid to some degree.  It is something I don't need to worry about right now.

New additions Starboard side.

It is very satisfying to see at least a little progress every few days.  We haven't even hit winter yet (9 days til the solstice!) and even so I feel as though so much has gotten done.  The interior of the boat feels as if new and has really change the character of the boat down below.  It also has made the boat feel more mine, or more of a reflection of me.

Tut tut, it looks like rain!

Still more gray and wet days.  Seems as though I don't remember when I last saw the sun.  It hasn't been that long, I am just being a bit dramatic.
I did use the gloomy weather to get some work done in the shop.  I got the "hanging knee" fashioned for the cabinetry at the navigation station.

Nav station and first stages of the cabinet/shelf.

I still need to do the finish work as in sanding and stain and varnish but the varnish won't happen until Springtime.  Now that the knees are fitted and thus the dimensions of the upper shelf established and locked in, I can now work on the cabinet itself.  The wood is the same reclaimed stuff that I have been making all of the trim in this project from, so I hope that it will tie all of the new accommodations together nicely when finished.

I found some high density foam pieces with a fabric backing on it.  It is often sold as "interlocking rubber tiles with a berber covering" and I found that it works wonderfully as a floor cover in the cabin.  It is nice to walk upon, and stiff enough to hold it's shape and not bunch up or slip the way a rug might, and it insulates the cold floor amazingly well.  I would recommend it to anybody using their vessel in colder weather.  It also has a nice clean appearance to it that makes up for it not being wood.  Because it is so stiff cutting it to size holds it within the fiberglass pan that the cabin sole sits within.  I found mine in somebodies trash but having used it wouldn't really hesitate to have to buy it, and in fact I may purchase some more just to cover other parts of the hull that need insulation, for temperature or sound.  It could keep items from chaffing the inside of the hull and it floats.
The cabin has become very cozy and is a nice retreat even while sitting in the boat barn on dry land.  I have to take my consolations where I can, especially this time of year.

The gray floor covering is made from rubber, interlocking tiles
with a berber facing.  It's warm, soft, good traction, and clean looking.

Warm cabin

Today it was work around the property, but when it came time for a break, and afternoon tea, I decided to go to the boat to sit in the cabin and evaluate and admire the work done so far.
The cabin was cold inside, about mid thirties fahrenheit.  No sunshine today to heat up the boat barn.  So I lit up the oil lamps and drank my hot tea.  I looked around at all the different parts coming together and enjoyed the atmosphere in the little cabin.  The dark wood, the deep green fabric on the settee, the tartan plaid curtains, the bronze and brass fittings and lamps, the light of the flames in the lamps, all of it coming together to make a space that feels as comfortable as a favorite sweater.
The heat of the lamps got the thermometer moving upward.  My eyes focused on the wood stove.  I have yet to make the new arrangements for the stove.  The new arrangements will drop the stove down lower and closer to the floor where it has always remained cold no matter what the temperature up at the ceiling.  The stove arrangement is probably next on the list.
I have not lit the stove since the boat has been in it's barn.  There is plenty of air circulation in the barn to allow for use of the stove, or so I suspected.  It seemed like a good day to try lighting it and finding out, after all I could just light a small fire and then monitor the air in the barn and if it was fine build it up a bit.  After all the lamps had warmed the place up a bit already, what ever the stove could do would only help.
The small fire was fine and though the barn got a tiny bit smoky when I started the fire, it cleared up right away.  This boat has a Dickinson solid wood stove.  The stove is fine for ornamentation but it is lacking for practical use.  The stove top is only 3 inches deep, and that makes it hard to fit a pot or kettle.  The fire box is small and  the stove is made of stainless steel sheet so it doesn't have much mass, a key feature for a wood stove.  Still, I can heat up the cabin a bit and the open front screen/damper gives a view of the flame.  Sitting in the cabin with the wood stove burning watching the flame in the fire box or the flames of the lamps made the place really quite wonderful to be in.  It is such a small cabin but on a cool or wet day coming down below to the welcoming space makes it all the better for it's size.
I wasn't going to stay long so I let the stove die down.  The cabin got warmed up to just above fifty degrees in the time I was there.  If I'd had a bigger fire going instead of just the little test fire I had I am sure the room would have gotten quite comfortable.
If I had it to do again, and the cost wasn't a problem I would probably get a SARDINE wood stove from Navigator Stove works.  I have a LITTLE COD from them for my kitchen and it is lovely.  The SARDINE would be on the large size for my boat, but just, and if I was willing to give up the port settee completely then that stove could be just great.
I will make the DICKINSON stove work and it will be fine, it is fine.

Table cabinet is done!

Today I installed the cabinet/shelf/table mount.

New folding table/cabinet.

The cabinet is made from oak shelving that I found discarded.  It is on the heavy side but not to a fault, just so that it feels substantial.  The back of the cabinet is paneled with the same wood that I milled down and put a bevel on the edges.  I don't have the means to make a tongue and groove joint, but the bevel seems to work fine.
The cabinet is attached to the shelf above it with 4 bolts and to the back rest of the settee with 2 screws. It joins all these pieces together and make them stronger.

The fiddle has to be stained and varnished yet

I will probably make a fiddle that goes half way up the cabinet for those times when sailing rail down.  I am still playing with the idea of making some doors to close up the whole space, but it seems a bit much for such a small space.

The new cabinet and folding table mount.

salon table

Mocked up the salon table using the old table top.  The fit is great!!!  I am very happy to be using the same old top that I once used in this boat.

The new table position temporarily mounted up.

 I set up my boat dinnerware just to test out the fit.  It is great for such a small space and plenty for cozy dining.  I am thinking of making an outboard shelf/mounting surface for the hinges of the table that will have storage for utensils and cups or condiments.....
The table folds up and out of the way for sleeping, or, it can be taken completely away with the quick connect hinges.  Sweet!!  There is just enough room for sitting and is quite comfortable with the bulk head as the back for one person and the nav-table the back for the other.

View from the companionway.
This table is just big enough for two.

The cabin is 6'6" long by 8 feet wide.  In it I have no got a Navigation desk, a dining table, a proper galley with sink, stove and storage, a multi-use area/shelf that would be ideal for prep cooking, a wood burning stove, and two full sized sleeping berths that double as settees!  Instead of all these accommodations making the space feel smaller it actually makes it seem bigger, as if there are different areas to be in.  Weird and wonderful.

Next on the list is getting the wood stove lower in the cabin, about 9 inches lower and only about 4 inches off the cabin sole.  This will help a lot in heating the lower area of the boat.  If I could put the wood stove in the bilge I would.

The cabin is now a nice place to be and just sit and write or read.  Imagine how nice it will be when the boat is in the water!

Interior layout of the Bristol

After being out of the water for a while, five years now, I think, and not being willing to put her back in without having taken advantage of having her right here at home, so close and easy for working on, I have finally got to work on the interior layout of the boat.   I have wanted to "adjust" the layout of the cabin since I got her.  The design did not include a table for dining, and the icebox that it did include was not used as such, and a waste of space.  In my changes to the cockpit and my adding the cargo area, as I call it, I opened up the cabin to the space under the former cockpit and wanted to keep that access thru that was originally blocked by cabinetry and the sink.

Now, the navigation desk has replaced the icebox.  The sink is over the port side and the passage under the bridge deck to the cargo area is open and useable.  My thought is that a ice cooler can be used for food that needs cooling and for longer trips I can get an electric cooler (12v DC) if I feel the need.  This can live under the bridge deck and be moved to where ever is convenient.

The clamped in place, temporary stairs are a good fit, easy to use.  The nav-desk to Starboard, sink and stove to port
with berths below each

Port berth and galley.  The shelf under the bridge deck will serve as a cooking prep area.

The nav desk will have shelves outboard of it.

The lifting lid for storage underneath of charts and such.

The space is small down below on such a skinny 27 footer, but it is more than enough and it is also very cozy.  I have yet to add in the table, which will go over the starboard settee and fold up and out of the way.  I may get to that today.

I am pretty happy with the result.  Most of the parts are component and will be disassembled and finished with varnish before being finally fastened in place.  Now, I can retreat to the cabin and enjoy some time in a cozy space that is familiar and useful.  I may not be on the water right now, but I am still getting to mess about in boats.  The boat serves as a great tiny home/studio/retreat, even while on land.  The work on the cabinetry has challenged my carpentry skills a bit and made me a little better, I think.

Remodeled galley

The new galley arrangement is pretty much in.  At least all the big work is done, the layout decided, the framing cut and installed and the test fitting of the whole thing.  I think I will be very happy with this setup.

The sink counter is solid wood, grainy and looks old,
but in a good way.

This set up accomplishes two things very well that I've wanted but up until now couldn't figure out how to get it.  The first thing is that I wanted a galley that I could really work at.  I am 6'1" tall and the boat is perfect for a person about 2 inches shorter than I am, but for me I have to stoop almost constantly.  Getting the galley along the port side allows me to stand with my head under the companionway hatch where a few inches of height is gained.  The sink is elevated so that it is at a good height for washing up or with a cutting board on top and I don't have to suffer a back ache.  With the sink elevated the stove top is in a sort of well about 6 inches deep.  This will add security to the cooking when in a seaway or the odd wake comes by.

Forward of the sink there is still room
to sit comfortably, with feet on the cabin sole
or under the sink.  The wood stove is just off the right edge of the picture
and will make this a cozy place to sit

The other thing that is accomplished with this set up is that the port settee/berth is still quite useable.  The sitting space is generous for one person and the berth is still very easy to get in or out of.  The raised sink keeps the plumbing from conflicting with habitation of the space.

I have yet to install the fresh water pump as I am reworking it.  It is an older style pump, chromed bronze, and quite nice.  I plan to install it forward of the sink so that it aligns with the drain and is easily right hand operated.
I am more in the mind of using small containers for water storage these days but this is a simple manual system and the tank is 20 gallons (I think) under the v-berth with access hatches to clean it out.  Pretty simple and I don't even have to keep the tank full to make it useful.

The drawer is yet to be put in place
and the trim is a project for the winter.

All the way aft, under the stove counter top, I have built and added a drawer that is about 15 inches deep, and 8 inches wide.  This drawer uses up space that is otherwise wasted and still does not interfere with the feet of the person in the port berth.  I hope to make the face of the drawer match the sink counter top, which is made from varnished reclaimed wood.  The wood was from a very old table I found in a trash pile.  Scraping away the 2 or 3 layers of different color of paint and sanding revealed a nice wood that is blondish with dark grains running thru it.  The facings, on the stove counter and the bulkheads are all stained and varnished Luan plywood.  I use it because it is cheap and uses exterior grade glue and has a nice red color to it, a type of mahogany I think, or at least it looks that way.  Using a stain I have got it to match the existing varnished plywood bulkheads pretty closely.

Two burner alcohol stove and original sink.
The stove counter is lower than the sink
adding a bit of safety for pots that might
jump as well as all the galley stuff.

The stove is a two burner alcohol stove which has served pretty well.  The sink could be deeper to my taste but it is what the boat came with and will serve.

It is good not to have to look at all that white/greenish/yellow formica counter top that spoke so strongly of the 1960's, when this boat was built.  Though the varnished and stained wood is dark it is rich looking and with the white paint anywhere the varnished wood is not the over all affect will be pleasing, I hope and suspect.

I have the cruising model but now with the galley along the port side
On the dinette model the galley takes up the entire starboard side.
I like my compromise better as I keep the port berth

The red area is the new galley
The purple area is the "hold" that is open to the cabin
and replaced the larger part of the cockpit.